Project!!! How to Make Segmented Fish From Polymer Clay

Beastie recently found an old completed project and asked if we could make her a necklace. I said, "SURE!" and decided to share it with you too.

Here are the full instructions on how to create segmented fish from STAEDTLER Fimo

Materials needed to create this project:

2 STAEDTLER Fimo colors of your choice, plus a scrap of black Fimo for the eyes

Scrap Fimo to make the molds (about a quarter block)

Metal leaf

Size (adhesive) for gold leaf

STAEDTLER Fimo gloss varnish

Heavy beading elastic

Crimp beads that fit the elastic and match your metallic powders

4mm spacer beads that match your clay colors (2 or 3 for each body segment)

Jump rings

Eye pins

Fine chain

4mm facetted glass bead 

Tools needed to create this project:

Clay rolling tool or (exclusively used for clay) pasta machine

Toothpicks

Corn starch (to use as a release agent)

Round clay cutters varying from .5in to 1in (or a craft knife to cut circles)

Parchment paper

A selection of soft, small paintbrushes

Flat and round nose jewelry pliers and wire cutter to assemble piece

STAEDTLER fine tip permanent black marker

Step #1. Making the Molds

Make a 1/2 in thick worm of scrap clay and cut 5 segments that are each 1/4in longer than the segment before it. Roll these segments into balls and form them into flattened teardrop shapes. Insert a toothpick into the flat end of each teardrop shape and bake on a parchment lined baking sheet for 30 minutes in a preheated 230 degree oven. Let the molds cool before using.

Step #2. Blending the Clay 

Create a Skinner blend by rolling out two clay colors to 1/8th inch thick sheets. Cut the sheets diagonally and stack, match the wide end of one color stack to the thin end of another. Fold the clay over (Long way every time) and re roll to a 1/8th inch thick sheet. Repeat this process rolling and folding (always in the same direction) until the clay colors blend in the center of the sheet. Keep the blending sheet neat and tight, by pushing the side edges straight after every fold.

Step #3. Making the Body Segments

Roll the blended clay sheet out to 1/16th in or setting 5 on a pasta machine. Use the circle cutters or a craft knife to cut out circles that will cover each of the mold pieces. My largest cutter is 1in and my smallest is 1/2in. I cut my circles where the colors met on my flattened clay sheet. Dip the molds in corn starch and tap off the excess before you form the body shapes. 

The cornstarch will help the clay come off the mold.  You may have to re apply the cornstarch during molding by removing the sheet if it starts to stick to the mold and re dipping in cornstarch. I added small flattened balls of matching clay just on top of the tip of each mold before covering with the clay discs to form the body segments. The flattened ball of clay will reinforce the tip of each segment and strengthen the hole for beading later.

Form these flat, two color discs over the molds to create five body shapes. 

Make a tail piece that will fit into the smallest body segment. Each body segment needs a hole in the center for stringing the pieces together. The tail hole should go from top to bottom on the tail end that fits inside the smallest segment.

Stand the tooth pick based molds up in a worm of scrap clay for baking. The tail piece can be baked on a pile of cornstarch to keep it from flattening on the baking sheet. Bake these pieces and the tail on a parchment paper lined baking sheet in a preheated 230 degree oven for 20 minutes. Allow the pieces and molds to cool before unmolding.

   Using only the largest and second largest molds, make two new body segments. The largest segment will be the head of the fish and will need two small black clay eyes and some gills. The second largest segment needs two triangular side fins. Use a toothpick to add some fin texture. Bake all pieces on a parchment lined baking sheet in a preheated 230 degree oven for 30 minutes.

Step #4. Gilding and Varnishing

Mount each of the body pieces onto the end of a tooth pick with the cup of each segment facing up and stand each tooth pick up in a piece of Styrofoam.  Paint the inside and edges of each body segment with two coats of size for metal leaf. Let the coats dry between layers. When the size is clear but still tacky, apply gold leaf over the sized areas and burnish it into the size with a dry brush. Dust off any extra leafing. 

Coat each piece with at least three coats of varnish, letting each coat dry before applying the next coat. 

Step #5. Assembling the Pieces

 Start with the tail section and work toward the head. 

Thread a crimp bead onto the beading elastic and then add the tailpiece. Thread the elastic back through the crimp and tighten the elastic up to the tail. Crush the crimp bead in place and trim the tail end of the elastic leaving the working end to thread more pieces. Add the smallest body segment next. Then comes two or three spacer seed beads depending on how deep your body segments are. Add the next body segment, more spacers, and then the next segment until all segments but the head are loaded onto the elastic.

 After the body segment before the head is added, thread on another crimp bead, then an eye pin. Feed the elastic back through the crimp and tighten everything up to the body. Crush the crimp bead into place and trim the tail of elastic. Put one or two spacer beads onto the head pin and add the head segment. Add a decorative 4mm facetted glass bead and turn an eye tight to the bead with the round nose pliers being careful not to crush the nose of the fish.

Add a jump ring to the nose loop to hang the piece.

Alternate color: Koi

Roll out a sheet of translucent clay 1/8th in thick and press black and orange balls of clay onto the surface. Flatten these sheets slightly by rolling with a clay roller. 

Stack the sheets with the color sides both up and put through the pasta machine or clay roller until it is 1/16th in thick.

 Just before we put the clay through the rollers the last time we sprinkled it with heat safe glitter for some sparkle. The glitter looks like fish scales. 

 We added 4mm doll eyes to these fish and secured them with clay eyelids. Our doll eyes are made of Fimo clay using the technique shown HERE .  

  

Winter Makes and Second Hand Finds

It's been very, very cold and very, very warm in the last couple of weeks. We're not sure if we should be tucking into our nests to cower from winter or outside enjoying the brief spots of warm. We've found a bit of time for exploring our local Antiques Warehouse and we've been making some things too.

We scored Beastie this swank pair of never worn saddle shoes. (I know they're on the table, but they're not new so I'm allowing it.) 

Amazing linen tablecloth. I love that it matches the seasonal fruit selection. 

Beastie's new self designed dress. She chose the fabric and the pattern and added pockets and a tie.

She also wanted some new mittens. we used our own pattern to make these. Here is the link to construction. And the link to finishing. It was a speedy make. Took all of twenty minutes from start to finish. She chose Strawberry Shortcake flannel for the lining. 

Made Merc some scrunchies and sent them off this morning. 

Fiddling around with some new sculpting techniques for my hard gel nails. Very excited about casting molds of these. 

There has be sooooooo much soup making this winter! Nothing seems to warm us up like a nice hot cup of home made soup. Hope you're all keeping toasty. 

Memory Ink

Cher  started my sleeve a few months ago. The first piece, a wrist cuff of sorts was actually a piece of my Nammies lace. Cher made a stencil from a scan of the lace and tattooed it right onto my arm. New spot up my forearm is my Mom's sewing machine. It's the machine she made my clothes and doll clothes on. It's also the machine she taught me to sew with. It was sketched out from a photograph and a stencil was printed. She added the wildflowers and berries that I used to pick for my Grandma when we stayed with them at their cottage every summer. She used a sharpie to freehand blackeyed Susans, devil's paintbrushes, blueberries, blackberries and raspberries. 

The detail Cher achieved was amazing! The teeny tiny numbers on the tension toggle were unexpected. Can't even begin to tell you how happy this makes me.

She even mixed custom colour to make sure the machine was exactly right.

This is mom's machine.

and this is Mom with the machine. Cool memories in ink by an amazing artist. Love that we see these images everyday and talk about them. Next addition? Grandpa George's hula popper? Nampies pipe? Grandma Maggie's darts? Great Grandma Mowat's thistle or crocheted Teddy bear? A tea cup for Mercy? A whisk for Maggie? 

So many memories to archive and document.... 

Only so much arm.....

Melting into 2019

Well..... I've been busy with soooooo many lovely new nail clients that I've not had much time for anything else. Don't read that as a complaint. It's probably the most lovely thing that could have happened to me. I'm maxed out and have had to start turning away new clients. I'm beginning to find a sense of balance between "work" and chores and fun me time. I'm looking forward to the new year ahead. Full of changes and consistencies alike. 

Here is a sample of some of the amazing design requests I was lucky enough to be asked to try. I think they turned out pretty well for my first real year of tech-ing.

 Today Maggs made us all a lemon pudding sponge cake for breakfast. What? Breakfast cake is a thing!!!

I'm still making lists. This is my first list in my new journal from my Mom. Beastie likes to help with the pictures. She added, make soup.

One of the only things we got to make for Christmas this year was Marmalade and candied peel. We all have that terrible cough. I think we're on week four now. Should be gone soon though.... Right?

P.S.: A heaped teaspoon of marmalade in a mug with hot water and a splash of dark rum is helping with the cough.

I'll finish with this pic of my brother and his band mates from high school. He's second from the left. The tall one with no guitar. He was the drummer. I must have been a horrible sister back then. I'm terribly proud of him. Just want to see if he's watching.

Happy new year all!

Oh HI!!!!!

Forgot I had a blog there for a little while. Sorry folks. Thanks for hanging in there waiting for new posts. Here are a few things we've been up to this past month. 

I miss blogging!!!

I have sorted my fabrics (most gifted recently in three GIANT leaf bags) into different sorts. A stack of cotton, a stack of jersey, a stack of fleece...... well, you get the picture. Beastie came to the sewing room and asked for pants. I told her to pick one from the fleece pile and one from the cotton. This is what she chose. She's a fashion icon now. Notice the stylish and functional pockets? 

We've baked up some bun-nies..... Get it? BUN nies???? You see what we did there???

First day of school ever and Beastie was struck down with the terrible flu.

Looking forward to trying again next week. I'll stock up on hand sanitizer.....

Boot socks!!! I'm irrationally concerned that her calves may chafe inside her rainboots and am taking action to prevent it! 

We were gifted a bazillion gorgeous organic tomatoes. Beastie was in charge of cleaning them up.

I let her make tomato soup using the fresh fruit. She added molasses and basil and garlic but that was it. So yummers!

Loads of nail art has happened since I've been here and posted. I've particularly enjoyed the moon art that's been requested lately.

So adorable!!!

I've been enjoying the variety of shapes requested too.

More sock knitting! This lace reminds me that I can follow instructions. 

More moon art. These were all done with gel paint over hard gel support nails.

Couldn't decide on one purple...... so she decided on ALL of them.

These are mine this month. I think next month will be squirrels!!!

Found Beastie a real honest to goodness tool set at the antiques market! Can't wait to see what these two get up to. Oh hey!!! There's Mr. Jimmy in his new home sewn shirt too!!!